Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Henderson
When your furnace quits in Henderson, you don’t need a four-hour window and a guess about pricing. You need a live arrival time, a written price before any tool comes out, and a repair that comes with a written guarantee. That’s how our Furnace Repair team works on every call across 89002, 89052, 89009, and 89016, from Green Valley Ranch up to Anthem. Calls are answered by a live person 24/7, so call (833) 892-8106 at midnight or on a holiday and someone picks up.

Why Halden Heating & Air Sunrise Manor Is Henderson’s Preferred Furnace Repair Company
Henderson homeowners talk, and the complaints we hear about other companies are always the same: vague windows, a price that grew at the door, a voicemail when the heat dies on a cold night. We built our process to fix exactly that. Book online, get a live arrival time you can track to your door, and see a locked written price before any work starts. Every repair carries a written guarantee, a free second visit if it fails, and our 365-Day Done Right Promise.
Our technicians have up to 22 years of experience, and they’re background-checked and uniformed. We’re independently owned and operated under the Relay Home Co. network, held to The Relay Visibility Guarantee on every job. Henderson homes throw specific problems at a furnace, and knowing which era of house you’re walking into matters more than a truck full of parts.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Emergency Furnace Repair in Henderson
Emergency Furnace Repair in Henderson usually means a no-heat call during a cold snap, a furnace blowing cold air, or a unit that keeps tripping the breaker and won’t stay on. When the overnight low drops and the heat won’t fire, that’s not something to wait out. We answer live 24/7, send a background-checked technician with a live arrival time, and hand you a written price before anything is touched. Most furnace repairs in Henderson run $150 – $700, and the exact figure gets put in writing first. If the repair fails, the free second visit is automatic under the guarantee.
What a No-Heat Call Actually Involves
The tech checks ignition first: flame sensor, ignitor, and whether the induced-draft motor is pulling the right vacuum. From there it’s gas pressure at the valve, the control board, and a heat exchanger inspection for cracks. A written price follows before any part is ordered.
When a Failed Furnace Is a Real Safety Issue
A cracked heat exchanger can push combustion gases into your living space, and a furnace that keeps tripping a breaker is telling you the electrical load is wrong somewhere. Both are reasons to shut the unit off and get a trained tech out. We don’t walk homeowners through cracking open a heat exchanger or rewiring a panel, and no one should.
Furnace Maintenance in Henderson
Furnace Maintenance in Henderson means a flat-priced tune-up that actually documents what the tech found: flame sensor readings, blower amp draw, static pressure, and a heat exchanger check. A tune-up runs $80 – $200. Desert dust and monsoon grit pack the blower wheel and evaporator coil, so a furnace that skipped its fall service often short-cycles and overheats the heat exchanger by January. Our technicians aren’t paid on what they sell, so the written report reflects what the unit needs, nothing padded.
What Gets Checked at a Tune-Up
Filter, blower wheel, flame sensor, ignitor, gas valve, and the heat exchanger get inspected, plus a static pressure reading across the system. That reading is where Henderson’s ductwork problems surface before they kill a blower motor.
How Often Henderson Homes Need It
Once a year, ideally in October before the first cold snap. Homes in older downtown Henderson and Basic with original ductwork benefit from twice-yearly checks, since restricted airflow is the most common cause of heat exchanger cracks.

Trusted Brands We Service in Henderson
Our technicians are certified to service major brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We don’t claim to stock parts locally, since independent local professionals perform the work and pull what each job needs. That keeps turnaround fast without overpromising a shelf that doesn’t exist. Whether your furnace is a Goodman builder-grade unit from a 1990s Green Valley tract home or a Rheem in an older Basic property, the diagnostic process is the same: read the unit, read the house, write the price.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Henderson Homes
- Undersized original ductwork in 1990s – 2000s tract homes. Green Valley Ranch and Anthem furnaces sit on ductwork sized for the original tonnage, so a like-for-like swap inherits the same static pressure problem that shortened the last system’s life. High static pressure strains the blower motor and starves airflow.
- 100-amp panels and two-wire thermostats in downtown Henderson and Basic. Homes from the 1960s – 70s often can’t carry a modern furnace control board or a heat pump conversion, so a repair call turns into an electrical scope before any swap gets quoted.
- Heat exchanger cracks from years of restricted airflow. Desert dust and monsoon grit pack the blower wheel, airflow drops, and the heat exchanger overheats until it cracks. Owners often mistake this for a dead unit.
- Sagging flex duct in 150°F attics. Attics in Seven Hills regularly top 150°F in July, and flex duct sags and separates at the collar, starving the furnace. A tech checks duct connections before assuming the compressor or blower is bad.
Pricing for Furnace Repair in Henderson, NV
Furnace repair in Henderson runs $150 – $700 depending on the part and the labor involved. A flame sensor or ignitor replacement sits at the low end; a blower motor, gas valve, or heat exchanger job lands at the high end. What moves the number is the diagnosis: a simple sensor is cheap, but if the tech finds undersized ductwork or a panel that needs attention, that changes the path. The written price is delivered before any work starts, every time. Estimates are free, and the price doesn’t change at the door.
| Service | Typical Range in Henderson |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Maintenance / Tune-Up | $80 – $200 |
We Also Serve Cities Near Henderson
If you’re just outside the Henderson line, we connect homeowners with independent local professionals in Boulder City, Whitney, Paradise, and Enterprise too. Same written price, same written guarantee, same live arrival time. Whether you’re in basic Henderson or just across the way, the process doesn’t change. See our Furnace Repair in Henderson page for the full picture of what we cover.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Henderson
Because the new furnace inherits the same ductwork the old one choked on. Tract homes from that era were sized to original tonnage, and today’s loads push static pressure higher, so the replacement short-cycles just like the last unit did. The fix is reading static pressure and correcting the ductwork before the swap, not after.
Often it’s the panel. Original 100-amp service and two-wire thermostat runs in older downtown Henderson and Basic homes frequently can’t support a modern furnace control board or a heat pump conversion. A qualified pro scopes the panel before quoting any repair, turning a no-heat call into an electrical check first.
Usually restricted airflow. Desert dust and monsoon grit pack the blower wheel and coil, static pressure climbs, and the furnace overheats and shuts down on its limit switch. A flame sensor that’s drifted out of spec can also cause short cycles, which is why the tech reads both before ordering parts.
Once a year, ideally in October before the first cold night. Homes in older downtown Henderson and Basic with original ductwork benefit from twice-yearly checks, since restricted airflow is the most common cause of heat exchanger cracks here. A tune-up runs $80 – $200 flat.
Most furnace repairs run $150 – $700 depending on the part and labor. Sensor and ignitor replacements sit at the low end; blower motor, gas valve, and heat exchanger jobs sit at the high end. Call (833) 892-8106 for an exact quote, and estimates are free.
When your furnace fails in Henderson, call (833) 892-8106 for a free estimate. Book online, get a live arrival time you can track to your door, and see a written price before any work starts, backed by our written guarantee and the 365-Day Done Right Promise. Calls are answered by a live person 24/7, so no voicemail and no waiting for a callback.
Written by the team at Halden Heating & Air.