A Halden company - serving Sunrise Manor, NV

Lennox HVAC Service in Sunrise Manor, NV

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system*On approved credit; ask us about your options

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Why Sunrise Manor Homeowners Choose Lennox HVAC

Halden Heating & Air Sunrise Manor provides independent Lennox HVAC service in Sunrise Manor, NV: diagnostic repair, refrigerant recharge, tune-ups, and full system installation on Lennox equipment. What makes our Lennox work different is that we’re not tied to the manufacturer’s parts pipeline or a sales script, so the recommendation you get is the one that fits your home and your budget, not a quota. We’re an independent Lennox service provider and are not affiliated with or authorized by Lennox.

Call (833) 892-8106

Lennox builds equipment across a wide line, from the Merit Series to the Dave Lennox Signature Collection, and each family has its own habits and failure patterns. That matters in Sunrise Manor, where the east valley heat pushes every unit harder than the equipment was likely rated for. Call (833) 892-8106 and we’ll send a background-checked technician with a live arrival time you can track to the door.

Why Trust Halden Heating & Air Sunrise Manor for Your Lennox HVAC?

Our technicians have up to 22 years of experience, and a good share of that has been spent kneeling in front of Lennox condensers and air handlers. They know the Merit 13ACX and the older XC13 single-stage units, the Elite XC21 and XC25 variable-capacity systems, and the ML180 and ML193 furnaces. They also know the Signature Collection XC25 that pairs with the iComfort thermostat, where a comfort complaint is often a control or thermostat setting issue, not a failed compressor.

Every repair uses OEM-compatible Lennox parts where fit and longevity matter (capacitors, coils, ignitors, pressure switches, heat exchangers), so the system keeps running the way it was designed. We service your unit in a warranty-safe way: we document what we found, use parts that meet the manufacturer’s spec, and don’t do anything that would give Lennox a reason to deny a valid claim. You get a written price before any work starts, a written guarantee on every repair, and a free second visit if the repair fails. That’s the 365-Day Done Right Promise, and it’s automatic, not an add-on.

Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Common Lennox HVAC Problems We Fix in Sunrise Manor

Lennox equipment is generally well-built, but certain models fail in predictable ways, especially under the load of a Sunrise Manor summer. Here are the ones we see most:

  • Failed run capacitors on Merit 13ACX and XC13 condensers. A capacitor gives the compressor and fan motor the jolt they need to start, and in weeks of 100°F-plus heat these fail far more often than on milder climates. The symptom is a unit that hums but won’t cool, or a compressor that tries to start and trips. It’s one of the most common no-cool calls we run in Sunrise Manor, and usually a quick, low-cost fix.
  • Leaking evaporator coils on older Lennox air handlers. Older coils develop pinhole leaks, which show up as refrigerant that slowly disappears. Homeowners notice the system needs “topping off” every season. Repeated recharges are a warning sign, not a solution. A proper leak test tells you whether the coil needs replacement before you pay for another recharge.
  • Pressure switch and inducer faults on ML180 and ML193 furnaces. These furnaces rely on a pressure switch and an inducer motor (the small fan that pulls exhaust out) to prove safe operation before ignition. A clogged port, a weak inducer, or a failing switch trips the furnace off. This gets misdiagnosed as a bad control board more often than it should; testing the pressure circuit first saves you a costly board you didn’t need.
  • Cracked heat exchangers on aging Lennox furnaces. Where a furnace runs hard and cycles frequently, the heat exchanger (the metal chamber the flame heats) can crack over time. That’s a carbon monoxide concern, not a comfort one, and it’s one reason we inspect heat exchangers on every furnace tune-up. If it’s cracked, we tell you plainly and lay out your options.
  • Short cycling on variable-capacity Elite systems. An XC21 or XC25 that runs in short bursts can point to a thermostat configuration issue, a refrigerant charge problem, or a control board fault. These systems are more complex than single-stage units, and diagnosing them properly takes the right gauges and a tech who knows the ramp-up behavior.

Lennox Parts & Our Repair-vs-Replace Approach

Parts sourcing is where a lot of shops cut corners on Lennox work. We use genuine OEM Lennox parts for the parts that carry the load: capacitors, evaporator coils, ignitors, pressure switches, and heat exchangers. Those are the ones where fit and longevity directly affect how long the repair lasts. For commodity items like air filters and contactors, a quality aftermarket part does the job at a fairer price. We don’t stock Lennox parts locally; we source the right part for your specific model, which means the repair is done correctly rather than patched with whatever was on hand.

On repair versus replace, we’re not going to push a new system when a repair makes sense. Take an older Lennox condenser with a failed compressor or a leaking coil. We lay the repair cost next to the replacement cost and walk you through both, including how much life the rest of the system has left. Sometimes the repair wins. Sometimes replacement is the smarter money. You decide with real numbers in front of you. Call (833) 892-8106 and we’ll get a technician out with a written price before any work begins.

Our Lennox Service Process – Step by Step

  1. 1
    Diagnosis. We test the system against Lennox’s own specs for your model: capacitor and start-component checks, refrigerant pressures and superheat, pressure-switch operation on furnaces. You get a written price before a single tool comes out of the bag.
  2. 2
    Repair or install. For a repair, we fit the OEM Lennox or quality aftermarket part your system calls for. For a replacement, we size the new unit to your home, not to a guess, and set a firm install date. New installs are load-calculated and scheduled; we don’t promise same-day on a full system.
  3. 3
    Test and verify. We run the system through a full cycle, check the refrigerant charge and airflow, and confirm the fix holds. You get before-and-after photos of what we found and what we did.
  4. 4
    Warranty. Every repair is covered by a written guarantee and the 365-Day Done Right Promise. If the repair fails within the coverage window, we come back at no charge. That’s the free second visit, included automatically.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Lennox Products We Service & Install in Sunrise Manor

We work on the full Lennox residential range: the Merit Series (13ACX air conditioner and ML180/ML193 furnaces), the Elite Series (XC21 and XC25 variable-capacity air conditioners and the SL280V furnace), and the Dave Lennox Signature Collection (the XC25 paired with the iComfort thermostat). We also service older 10ACX and XC13 single-stage condensers still running in Sunrise Manor homes. Whether it’s a tune-up on a 15-year-old Merit or a new Elite install with a communicating thermostat, we handle it. Call (833) 892-8106 to schedule.

We Also Service These Brands

Halden Heating & Air Sunrise Manor is a multi-brand shop, not a single-brand one. Alongside Lennox, we service Carrier and Trane equipment across Sunrise Manor, so if you’ve got a mixed setup or you’re comparing brands for a replacement, we can help either way. That breadth matters when you want an honest read on what’s best for your home rather than a pitch for one label.

FAQs – Lennox HVAC Service in Sunrise Manor

Is Halden Heating & Air Sunrise Manor authorized by Lennox? No. We’re an independent Lennox service provider and are not affiliated with or authorized by Lennox. That independence is a feature: we’re free to recommend the honest repair or the honest replacement without a manufacturer script steering the call.

Do you use genuine Lennox/OEM parts? Yes, for the parts where it matters. We use OEM Lennox parts for capacitors, coils, ignitors, pressure switches, and heat exchangers, and quality aftermarket parts for commodity items like filters and contactors. Every part is chosen for your specific model, and we don’t stock Lennox parts locally, so we source the right one rather than improvising.

How long does Lennox service take? A diagnostic visit is usually done in one appointment, and most common repairs (a capacitor, a pressure switch) are same-day. If your job needs a part we have to order, we’ll tell you the timeline upfront and set a firm date. Call (833) 892-8106 for an exact estimate, free of charge.

What Lennox models and series do you cover? The Merit Series (13ACX, ML180, ML193), the Elite Series (XC21, XC25, SL280V), the Signature Collection XC25 with iComfort thermostat, and older 10ACX and XC13 condensers. If you’re not sure which model you have, the data plate on the outdoor unit tells us, and we’ll confirm when we arrive.

Will service void my Lennox warranty? Not when it’s done right. We use parts that meet Lennox’s spec, document what we found, and perform repairs in a warranty-safe way, so a valid claim isn’t jeopardized. If you have an active manufacturer warranty, tell us when you book and we’ll factor it into the work.

How much does Lennox HVAC cost in Sunrise Manor? Most AC repairs run $150 to $650 and furnace repairs run $150 to $700, depending on the part. A tune-up is $80 to $200, and a full AC installation is $3,500 to $7,500. Here’s the line-item breakdown:

Service Typical Range
AC Repair $150 – $650
Furnace Repair $150 – $700
AC Installation $3,500 – $7,500
Tune-Up $80 – $200

Call (833) 892-8106 for an exact quote. Estimates are free and you get a written price before any work starts.

Book Your Lennox Service in Sunrise Manor, NV

Whether it’s a Merit capacitor that quit in the heat or a Signature Collection system that needs a real diagnosis, we’ll get a background-checked tech to your door with a live arrival time you can track. Book online or call (833) 892-8106 for a free estimate. Written price first. Written guarantee on the work. That’s how we run every Lennox job in Sunrise Manor.

Written by the team at Halden Heating & Air.

Need HVAC help nationwide? Licensed & insured · within the hour response · free estimates
Call (833) 892-8106
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Halden Heating & Air Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch